VMC 3020

10.4" Rugged Vehicle Mount Computer with Intel Atom® x5-E3930 Processor, Touchscreen and IP65
  • Main Feature
  • 10.4" XGA TFT LCD monitor with 5-wire resistive touch
  • Aluminum die-casting and fanless design
  • Built-in Intel Atom® x5-E3930 processor, 1.8GHz
  • Automatic/manual brightness control
  • On screen F1 ~ F10 programmable function keys
  • Powered USB and COM (5V/12V, 1.5A) for accessories
  • Military standard for vibration and shock
  • iButton and RFID for ID identification
  • Wide range DC input from 9V ~ 60V DC in
  • Sunlight readable capability: 1,200nits LCD brightness
  • Operating system: Windows and Linux
  • CE/FCC/E-Mark
Add to Inquiry
LCD Panel 10.4-inch TFT LCD panel with LED backlight 1024 x 768 pixels (XGA) Brightness: 1200 cd/m² (typical) Viewing angle: 170° (H):170°(V) Contrast ratio: 900:1 (typical)
Touch Screen Sensor 5-wire resistant touch Anti-glare coating surface Transmission rate: 81 ± 3%
CPU & Chipset Intel Atom® x5-E3930 processor dual core 1.8GHz
Memory One 204-pin DDR3L 1600MHz SO-DIMM slot (default: 4GB)
Expandable Storage 1 x CFast 1 x 2.5" SATA SSD bay
Expansion 1 x Half size mini-PCIe socket (USB 2.0, PCIe 2.0) 1 x Full size mini-PCIe socket (USB 2.0) for LTE module with 1 x internal Mini-SIM 1 x M.2 2230 Key E socket (USB 2.0, PCIe 2.0, SDIO 3.0, UART) for Wi-Fi module
I/O Interface-Front 5 x on screen display buttons
- Power on/off
- Volume control (+/-)
- Brightness control (+/-)
Light sensor 4 x LED indicators (power, WLAN, shift, storage) F1 ~ F10 programmable function keys 2 x Built-in 2W speakers
I/O Interface-Lateral Right Side:
- 1 x CFast card slot
- System reset button
- USB 2.0 host type A connector
Left Side:
- 1 x antenna for WWAN
I/O Interface-Bottom 1 x Power Switch (ATX mode) Lockable power connector (power, ignition, ground) 2 x RS232 (full signals, RI, 0V, 5V/1.5A, 12V/1.5A) 1 x DB15
- 1 x Isolated CAN 2.0B
- 1 x iButton
- 1 x RFID (12V/1A. 5V/1A, 4pin)
- 1 x Optional RS232 Tx/Rx (share with GPS UART)
- 2 x GPI
    Sink type: 5VDC TTL (default)
    Source type: 3 ~ 28VDC
- 2 x GPO
    Sink type: 5VDC TTL (default), max current: 20mA
    Source type: 3 ~ 28VDC, max current: 150mA
1 x Powered USB (5V/1.5A, 12V/1.5A) 1 x USB Type A (5V/1A) 1 x Mic-in, 1 x Line-out 1 x Antenna for GPS
I/O Interface-Top 2 x Antenna for Wi-Fi
Mechanical Cooling system: Fanless Enclosure: Aluminum die castig Mounting: VESA 75/100 & desktop mounting Ingress protection: front panel IP65 Dimension: 289.98mm(W) x 229.97mm(H) x 68.70mm(D) Weight: 3kg, 6.61lb
Power Management 9V~60V DC in Reverse protection/over voltage protection/under voltage protection Ignition On/Off control & programmable On/Off delay timing Wake up by SMS, RTC and ignition
Operating System Windows 10, Linux
Environment Operating temperatures: Ambient with air -30°C to 60°C Storage temperatures: -30°C to 70°C Relative humidity: 10% to 90% (non-condensing) Vibration
- Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
- Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
- Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers= 20g
- Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment= 75g
Standards/Certifications CE/FCC class B/E13
Add to Inquiry
Take a minute and tell us what you think!