CPU | Intel® Atom™ processor quad core E3845, 1.91GHz |
Memory | 1 x 204-pin DDR3L SO-DIMM socket support 1333MHz up to 8GB. Default 4GB |
Storage | 1 x 2.5" SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available) 1 x CFast (externally accessible) |
Expansion | 1 x Full size mini-PCIe socket (USB 2.0) for LTE module with 2 x external SIM 1 x Full size mini-PCIe socket (USB 2.0, PCIe 2.0) for LTE module with 1 x internal, 1 x external SIM 1 x Full size mini-PCIe socket (USB 2.0, PCIe 2.0) |
Function | 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) Built-in G-sensor |
I/O Interface-Front | 4 x LED for power, storage, WWAN, WLAN 2 x Externally accessible SIM card socket (selectable) 1 x Phone jack 3.5mm for 1 x Mic-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x Externally accessible 2.5" SATA 2.0 SSD/HDD tray 1 x Externally accessible CFast card socket with cover 1 x Reset button 1 x Type A USB 3.0 compliant host, supporting system boot up 4 x Antenna hole for WWAN/WLAN/BT 1 x Antenna hole for GPS |
I/O Interface-Rear |
1 x Circle Type DC Input 9~60VDC with ignition and typical 19W power consumption - 24VDC (16.8~31.2V), non-isolation - 36VDC (25.2~46.8V), non-isolation - 110VDC (77~143V), w/ 3KVDC isolation 1 x M12 with two USB 2.0 compliant host, supporting system boot up 2 x M12 10/100/1000 Ethernet 1 x Phone jack 3.5mm for 1 x Mic-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz 1 x DP port, resolution up to 2560 x 1600 @60H 2 x DB-9 RS-232 (isolation) 1 x DB-9 RS-422/485 (isolation) 1 x 16-pin terminal block - 1 x CAN Bus 2.0B (on board) - 4 x DI, 4 x DO with isolation Input Voltage (internal type): 5VDC TTL (default) Input Voltage (source type): 3~12VDC (Programmable Digital output or optional isolation) Digital output (sink type): 5VDC TTL (default), max current: 20mA Digital output (source type): 3~19VDC, max current: 150mA |
Power Management |
Power input 24/36VDC w/o isolation, 110VDC w/ isolation
Ignition On/Off control
Programmable On/Off delay timer
System wake up event - Ignition switch - RTC timer ALARM interrupt - Cellular MODEM wakeup signal System wake up condition - Wake up event is triggered, and DC input voltage is greater than UVP threshold - Timer delay is only applicable for ignition on System power down condition - Soft off, or ignition off Timer delay is only applicable for ignition off |
Operating System | Windows 8, WES8 Window 7, WES7 Linux kernel 3.X |
Dimensions | 260mm (W) x 176mm (D) x 70mm (H) (10.24" x 6.93" x 2.75") Weight: 2.5kg |
Environment |
Operating temperatures: -40°C to 70°C (w/ industrial SSD) with air flow -20°C to 50°C (w/ commercial HDD) with air flow Storage temperatures: -40°C to 85°C Relative humidity: 10% to 90% (non-condensing) Shock (SSD/HDD): Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g |
Standards/Certifications |
CE
FCC Class A
EN 50155: 2017 - Ambient temperature EN 50155, Class OT4 (-40~70°C), 85°C for 10 minutes - Interruptions of voltage supply class - Supply change over class C1, C2 - EMC EN 50121-3-2: 2016 - Environment EN 60068-2-1, EN 60068-2-2 - Shock and vibration IEC 61373 Class B - Protective coating class PC1 (PC2, by request) EN 45545-2:2013+A1:2015 (PCB) |