CPU | Intel Atom® processor E3827, Dual Core 1.75GHz |
Memory | 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 4GB |
Storage | 1 x 2.5" SATA 2.0 1 x External accessible SD card socket |
Expansion | 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0+ PCIe) 1 x Full size mini-PCIe socket (SATA or (USB 2.0 + PCIe)) 1 x Half size mini-PCIe socket (USB 2.0 + PCIe) |
Function | 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning Built-in G-sensor |
I/O Interface-Front | 8 x LED for power, system status, storage, WWAN, WLAN, GPS, LAN, GPIO 2 x External accessible SIM card socket (selectable) with cover 1 x Audio jack 3.5mm for WWAN voice communication, including 1 x Mic-in and 1 x Line-out 1 x External accessible SD card socket with cover 1 x Event button (trigger type) 1 x Reset button 1 x Type A USB 3.0 compliant host, supporting system boot up |
I/O Interface-Rear |
1 x 9 ~ 36VDC input with ignition and 11W typical power consumption
1 x Type A USB 2.0 compliant host, supporting system boot up
1 x RJ45 10/100/1000 Fast Ethernet with LED
1 x Phone jack 3.5mm for 1 x Mic-in (for WWAN voice communication)
1 x Phone jack 3.5mm for 1 x Line-out (for PC audio)
1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz
1 x DP port. Resolution up to 2560 x 1600 @60Hz
1 x DB-9 for RS-232
4 x Antenna hole for GPS/WWAN/WLAN/BT
1 x LHF 60-pin connector 1 x 6-pin power connector, 12VDC output (max: 1A) 1 x Type A female USB 2.0 compliant host, supporting system boot up 1 x DB-9 RS-232 1 x DB-9 RS-422/485 1 x DB-9 female 3 x DI and 3 x DO. On board CAN 2.0B signals (Programmable Digital Input) Input voltage (Internal Type): 5VDC TTL (default) Input voltage (Source Type): 3 ~ 12VDC (Programmable Digital Output) Digital output (Sink Type): 5VDC TTL (default), max current: 20mA Digital output (Source Type): 3 ~ 24VDC, max current: 250mA 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939) 1 x DB-9 for optional GPS Dead Reckening module 4 x BNC connector Video-In for optional 4-channel video capture card 4 x Audio connector for 7.1 channel audio output (front, center/woofer, rear surround, side surround) |
Power Management | Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode |
Operating System | Windows 8 Professional, WES8 Windows 7, WES7 Tizen IVI Fedora Wind River® Intelligent Device Platfrom XT 2.0 |
Dimensions | 180mm (W) x 180mm (D) x 50mm (H) (7.09" x 7.09" x 1.97") 1.7kg |
Environment |
Operating temperatures: -30°C to 70°C (w/ industrial SSD) with air flow -20°C to 50°C (w/ commercial HDD) with air flow Storage temperatures: -35°C to 85°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD) Vibration (SSD): Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Shock (SSD): Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g |
Certifications | CE approval FCC Class B E13 Mark |