PICMG 1.3 Full-size SBC with Intel® Q87 Support 4th Generation Intel® Core™ i7/i5/i3 Processors
  • Main Feature
  • Scalable platform 4th generation Intel® Core™ i7/i5/i3 processor + Non-ECC
  • Intel® Q87 PCH chipset support PICMG 1.3 specification
  • Support Dual channel DDR3L with NON-ECC DIMMs 1333/1600MHz up to 16GB
  • Support PCIex16, 4x PCIex1, 4x USB 3.0/ 4x USB 2.0, 4x SATA 3.0/ 2x SATA 2.0 and GbE
  • Display support for VGA, DVI, HDMI
  • Dimension 338.58 x 126.39 mm2 (W x L) (8 Layers Single side)
Add to Inquiry
CPU Support 4th generation Intel® Core™ i7/i5/i3 processor (95W/ 65W/ 45W/ 35W) TDPs, Socket LGA 1150
Main Memory 2 x DIMM, support Dual channel DDR3L (default)/ DDR3 NON-ECC DIMM (dual voltage models by auto detection for DDR3 and DDR3L Maximum 16 GB – 1066/1333/1600 MT/S
Platform Control Hub Intel® Q87 Express Chipset PCH
BIOS AMI system BIOS 16MBit SPI depended on AMT function Dual BIOS for Four PCIex1 and One PCIex4 (setting by DP switch)
Display The Processor Graphics contains a refresh of the seventh generation graphics Intel® HD Graphics GT1 / GT2 Share system memory Analog Display Support Drive a standard progressive scan analog monitor
Audio Reverse HDA interface, 2.0mm 2x5 pin header
On-board LAN 1x Intel® I217LM GbE PHY 1x Intel® I211 Gigabit Ethernet Controller RJ45 with LED connecter x 2 Support Boot From LAN (PXE) RJ45 LED Support Wake on LAN Extra (External) LED: 2 x 4 pin header
I/O Interface ITE8783 PS2 KB/MS reserve 1x6 (2.0m) JST connector 26-pin Box Header x 1 (2.0mm) SIO Box Header x 4 (2.0mm), COM1,3,4 support RS232, COM2 RS232/422/485, RI pin can be select RI/5V/12V with jumper (2x3 pin 2.0mm pin-header) 4 Ports USB 2.0 and 4 ports USB 3.0:
2 ports through 2.5mm JST Connectors, located near Rear Side of PCB (near CPU, USB3.0)
4 ports through
backplane (USB 2.0)
2 ports through I/O bracket (USB 3.0) 4-pin FAN connector x 2 (for CPU,System) On board pin header for IrDA Tx Rx 1x5/2.54mm pin-header HDD LED/ Power LED/ Power ON SW/ Reset SW On Board buzzer USBx1/ USBx1/ LAN1 RJ45 x1/ LAN2 RJ45 x1/ VGA DB15 from top to down
Power Requirements Power source from Backplane through Golden Finger and AUX +12V Support ATX/AT function by jumper setting BIOS default is (ATX MODE)
Dimensions 338.58mm x 126.39mm, 8 layers (single side)
Environment Board Level Operating temperatures: -15°C to 60°C Storage temperatures: -20°C to 85°C Relative humidity:
10% to 90% (operating, non-condensing)
5% to 95% (non-operating, non-condensing)
Certifications CE/FCC Class A compliant
Add to Inquiry
Take a minute and tell us what you think!