EBC 356

3.5” SBC with 4 core/2 core Intel® Pentium®/Celeron® Processors N3000 SoC Support DDR3L/M.2 module/4 x USB 3.0/2 x SATA 3.0/3 x HDMI interfaces
  • Main Feature
  • On-board Intel® Pentium®/Celeron® Processors N3000 product family (codename Braswell)
  • Supports dual channel DDR3L 1600MHz, 2 x SO-DIMM, up to 8GB system memory
  • 3 x HDMI connector, 2 of 3 HDMI resolution support 4K/2K
  • 2 x SATA 3.0/ 4 x USB 3.0/M.2 module/ 4-in & 4-out GPIO, Mic-in , Speak out
  • Support AT/ATX mode and single +12VDC input
Add to Inquiry
CPU Support Support Intel® Pentium®/Celeron® Processors N3000 product family
Main Memory Dual 204-pin SO-DIMM socket supports up to 8 GB DDR3L 1600 MHz SDRAM
BIOS AMI System BIOS Plug and play support Advanced power management and advanced configuration & power interface support
Display Integrated Intel® Gen. 8 Graphics Engine Supports HDMI interface 3 x HDMI connector 2 of 3 HDMI resolutions support 4K/2K,
(3840x2160 @ 30Hz, 2560 x 1600 @ 60Hz)
1 support 2K (2560x1440 @ 60Hz)
Audio Realtek ALC886 CODEC for high definition: 1 x 4 pin pin-header for mic -in 1x 4 pin-header for line out 1x 5 pin header for speak out
On-board LAN 1 x Intel® i210 Gigabit Ethernet Support PXE boot from LAN, wake on LAN function
Expansion 1 x M.2 slot, for an optional 3G/4G or M.2 SSD module
I/O Interface Series port: 2 ports COM1/2: RS232 1 x10 pin JST connector 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL level (0/5V) One 4-pin FAN connector One 3 pin header for AT/ATX mode One 6 pin header for PS2 keyboard & mouse One 4 pin header for power/storage LED Onboard buzzer/SMBus2.0/reset SW/on & off switch button
Edge I/O Interface 3 x HDMI connector 2 x dual stack USB3.0 connector 1 x RJ45 with LED connector
Watchdog Timer Watchdog time-out can be programmable by software from 1 second to 255 seconds and from 1 minute to 255 minutes (tolerance 15% under room temperature 25°C)
Storage 2 x SATA 3.0 ports
System Monitor Monitoring of 4 voltages and 2 temperatures 4 voltage (Vcore, +12V, +3.3V, 5V) 2 temperatures (CPU, system) 1 fan speed detection
On-board RTC On-chip RTC with battery backup 1 x external Li-ion battery
Power Requirements Power requirement: +12V DC Input One 4-pin power connector
Dimensions 146mm (L) x 102mm (W) 5.7” x 4.0”
Environment Board Level Operating temperatures: -20°C to 60°C Storage temperatures: -25°C to 85°C Relative humidity:
10% to 90% (operating, non-condensing)
5% to 95% (non-operating, non-condensing)
Certifications Meet CE FCC Class A
Add to Inquiry
Take a minute and tell us what you think!