NIO 200 IDR

ISA100/WirelessHART Process Automation Wireless Gateway
  • Main Feature
  • Full Mesh topology: robust wireless connectivity from ISA100/WirelessHART field device coverage to Wi-Fi backbone
  • Perfect triple play infrastructure: video surveillance via high throughput Wi-Fi backbone ensures video transmission without compromising video performance
  • Dual Wi-Fi Mesh path establishes better stability in backbone transmission
  • Wide temperature range, high EMC immunity to Surge, ESD and EFT
  • Suitable for deployment in hazardous environments
  • Incorporates power redundancy (DC and PoE)
  • Distributed network topology provides scalable infrastructure: easy integration and cost saving
Add to Inquiry
Datasheet(PDF)
Wireless Radio IEEE802.11a/n x 2, MIMO 2 x 2 IEEE802.15.4, 1 Tx, 1 Rx
Wi-Fi Frequency Ranges USA: 5.15~5.25 GHz, 5.725~5.825 GHz Europe: 5.47~5.725 GHz
RF Output Power: IEEE 802.11a 802.11a
- 28 dBm with 2 antennas 802.11n (HT20)
- 27 dBm with 2 antennas 802.11n (HT40)
- 27 dBm with 2 antennas
* Note: The available RF output power will be given by certified power in different region
Hardware WAN: 10/100/1000 Base-TX MDI/MDIX LAN: 10/100/1000 Base-TX MDI/MDIX Ethernet compliant with
- IEEE802.3/802.3u
- Hardware based 10/100/1000, full/half, flow control auto negotiation Push buttons: 1 x reset/restore to default LED:
- 2 x Ethernet
- 2 x 11an radio
- 1 x IWSN radio
- 1 x Power/Status N-Type:
- 5 x N-type connector for NIO 200IDR/IAG/HAG
- 4 x N-type connector for NIO 200IDG
Safety Compliance UL 60950-1; 60950-22 IEC 60950, 2nd edition EN 60950, 2nd edition IEC 61000-4-2 level 4 ESD immunity IEC 61000-4-5 level 4 AC surge immunity IEC 61000-4-4 level 4 electrical fast transient burst immunity
Wi-Fi Security (AP Mode) WEP (64/128/152) WAP/WPA2 mixed WPA2-personal (PSK+CCMP/AES) Hidden ESSID support MAC address filtering (MAC ACL) Station isolation
System Management nCare, web GUI management SNMP V1/V2c/V3 Event log Syslog information support Configuration backup and restore One-button-click to restore factory default setting Firmware upgrade SNMP V1/V2c/V3 client
Physical and Power 12~48 VDC
PoE (standard PoE 802.3at) Wall/pole mountable Dimension: 256mm x 226mm x 91mm Weight: 2.5Kg
Environment Protection Operating temperature: -40~75°C (altitude : up to 3000m) Storage temperature: -40~80°C Humidity: 0% to 95% maximum (non-condensing) Vibration: random 0.3g
Certification UL 60950-1; 60950-22 Radio approvals
- FCC Part 15.247, 15.407
- EN 300 328
- EN 301 893 EMI and susceptibility
- FCC Part 15.107, 15.109
- EN 301 489-1, -17
Anti-Explosive Certification UL: Class I, Division 2, Groups A, B, C and D, T4 ATEX: Class I, Zone 2; Ex nA II, T4
ISA100 Capabilities Wireless Communication Interface Specifications
Standard IEEE: 802.15.4
Data Rate: 250 kbps
Modulation: Q-PSK
Spread Spectrum: DSSS
RF Output Power: Max +15 dBm
Sensitivity: -95 dBm
Connector: N type
Antenna: 2 dBi@ 2.4GHz Performance Parameters
Scalability:
NIO 200IAG: 100 field instruments
NIO 200IDG: 200 field instruments, 20 subnets
NIO 200IDR: 50 field instruments
NIO 200HAG: 250 field instruments
Mesh Network Depth: 3 hops
Field Device Join Time: As low as 20 seconds
Reporting Rate:
ISA100: 1, 5, 10, 20, 30 and 60 seconds; 10 devices publishing/second
WirelessHART: 8,16,32 secs and 1-60 minutes; 10 devices publishing/second
High-Side Communication Interfaces Monitoring and Control System (MCS) MODBUS/ CP Gateway Services Access Point (GSAP) (only for NIO200IAG/ IDG) HART-IP (only for NIO200HAG)
Add to Inquiry
Take a minute and tell us what you think!