Share this page

NEX 716VL2G

Intel® Intel® Pentium® 4/4-M/Celeron® ATX Board with GbE LAN/4 x PCI Slots
  • Main Feature
  • Supports Intel® Pentium® 4/4-M/Celeron® Processors with 400/533 MHz FSB
  • Supports 2 x 184-pin DIMM DDR 266/333 Memory up to 2 GB
  • Intel® 82845GV Chipset
  • Supports 1 x Intel® 82562EM 10/100 LAN and 1 x Intel® 82541 Gigabit LAN
  • Standard ATX Form Factor with 4 x PCI Slots, 3 x ISA Slots
  • 6 x USB 2.0, 4 x COM Ports
Add to Inquiry
Datasheet(PDF)
CPU Support Intel® Pentium® 4 processor up to 3.06 GHz with 512 KB L2 cache and 400/533 MHz FSB, Hyper-Threading technology and Intel® Net Burst Micro architecture support Intel® Pentium® 4-M Processor up to 2.6 GHz with 512 KB L2 cache, 400 MHz FSB and Intel® Net Burst Micro architecture support Intel® Celeron® processor up to 2.8 GHz with 128 KB L2 cache and 400 MHz FSB
Main Memory Two 184-pin DIMM sockets support up to 2 GB unbuffered non-ECC DDR 266/333 SDRAM Does not support double-sided x 16 DDR Chip Does not support stacking type memory
Chipset Intel® 82845GV chipset Intel® 82801DB (ICH4)
BIOS Award system BIOS Plug & Play support 4 Mbit flash ROM APM (Advanced Power Management) support ACPI (Advanced confi guration & Power Interface) support
On-board LAN Intel® PRO/100 Network Connection (Intel LAN S82551 ER) x 2 Intel® 82562 EM 10/100 Fast Ethernet Controller x 1 Intel® 82541GI Gigabit Ethernet Controller x 1
Display Intel® 82845GV chipset with integrated graphics controller 64 MB VGA shared memory 15-pin CRT connector x 1
I/O Interface Serial port: SIO x 4 (COM2 with 422/485 optional), 9-pin header x 3, 9-pin D-Sub connector x 1 Parallel port: D-Sub 25-pin connector x 1, EPP/ECP support LAN: 10/100 Fast Ethernet LAN x 1 and GbE LAN x 1 IDE HDD: Dual Ultra ATA 33/66/100 channels, 40-pin connector x 2, supports up to 4 HDDs (4 EIDE device support) Floppy: 34-pin connector x 1 PS/2 Keyboard/Mouse: Mini-Din connector x 2 GPIO (4-in, 4-out) Reset SW: on-board 2-pin header SM bus: on-board 2-pin header USB 2.0 x 6 5-pin IrDA pin header x 1
On-board RTC On-chip RTC with external Lithium battery back up System Monitor Derived from ITE8712 super I/O 8 voltage (for +1.5 V, +3.3 V, +5 V, -5 V, +12 V, Vcore, +3.3 Vsb and +5 V stand-by) 3 fan speed (1 for CPU and 2 for system) 2 temperature (for CPU and external system)
Power Requirements Measure with Intel® Pentium® 4 2.66 GHz +3.3 V: 0.6 A +5 V: 1.5 A +12 V: 5 A +5 Vsb: 0.1 A Measure with Intel® Pentium® 4-M 2.4 GHz +3.3 V: 1 A +5 V: 2 A +12 V: 3.5 A +5 Vsb: 0.05 A
Environment Operating temperature: 0°C to 60°C Storage temperature: -20°C to 80°C Relative humidity: 10% to 90% (Non-condensing)
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!